Ongoing recruitment at KOHASA Engineering Company Limited

0

KOHASA Engineering Company Limited is an entirely indigenous onshore and offshore Oil & Gas Production Facilities Design and Construction firm with an enormous reservoir of expertise in several fields of engineering.

We are recruiting to fill the positions beneath:

Job Title: Reliability and Maintenance Specialist

Location: Nigeria

Job Description / Responsibilities

  • The Specialist will develop and lead reliability enchancment processes by working carefully with Clients Project Management
  • Team in addition to their Operations & Maintenance Organization.

In addition, the candidate will:

  • Identify and consider threat and reliability enchancment alternatives by means of assessments of plant and related knowledge.
  • Establish reliability fashions in all phases of engineering (pre-FEED to DED) and on working amenities.
  • Lead cross self-discipline evaluation groups, together with teaching and mentoring in reliability values and methods.
  • Utilize reliability evaluation instruments to determine priorities and focus the organization on essentially the most vital enchancment alternatives.
  • Work carefully with Project Teams to construct reliability and maintainability into the power design.
  • Develop procedures consistent with gear criticality and to adjust to laws and firm requirements.

Educational and Qualifications

  • Bachelor’s Degree in Engineering, Registered Professional Engineer (or non-USA equal)
  • Years of Work Experience required: Minimum of 8 years demonstrable expertise within the reliability setting, ideally within the Oil and Gas Industry with good data of all threat evaluation methods together with RAM, QRA, FTA, FMEA and SIL.
  • Age: 35-40 years.

Job Title: Lead, Process Engineering

Location: Nigeria

Job Description / Responsibilities

  • Plans, schedules, and supervises course of design and or methods work for onshore and offshore oil and gasoline amenities tasks.
  • Reviews scopes of labor, budgets, commitments, schedules and progress. Makes use of progress reporting system.
  • The degree of help and supervision is determined by scope , section and progress of challenge
  • Review and administration of challenge and common specs, engineering procedures and engineering coverage.
  • Candidates should contribute effectively to the all types of course of associated actions associated to grease and gasoline actions for tasks, research, proposals, estimates and / or work enchancment applications. The Lead Process Engineer might be chargeable for challenge execution inside finances and time schedules, administration and main different engineers, and should be capable to work independently
  • However advanced issues could also be mentioned with a Process Specialist within the division.

The Lead Process Engineer should carry out and might be held chargeable for and conscious of:

  • Scheduling and estimating actions
  • Establishing the definition of foundation of design and design standards.
  • Consult specialists of the Process Technology Department and elsewhere , if relevant.
  • Perform feasibility, various analysis and course of planning research
  • Role and sensitivity of course of working pressures and temperature, stream evaluation and properties
  • Selection of course of schemes and course of working philosophy.
  • Preparation and upkeep of course of circulate diagrams together with warmth and materials balances
  • Preparation and upkeep of course of knowledge.
  • Preparation and upkeep of mechanical design situations for big course of vegetation.
  • Preparation of course of and mechanical design specs of apparatus, strains and instrumentation.
  • Preparation and upkeep of piping and instrument diagrams. Lead in screening conferences and communication with different
  • disciplines to confirm and be certain that course of necessities are will understood and correctly taken cares of by all involved.
  • Preparation and upkeep of hydrostatic check diagrams and safeguarding diagrams.
  • Execution of all course of calculations and simulations.
  • Preparation and upkeep of all security and environmental elements.
  • Preparation and upkeep of plant operation manuals
  • Review of all piping designs which can have an effect on the method integrity.
  • In respect of constructed vegetation is the consultant for all course of associated elements reminiscent of commissioning, start-up and check
  • runs.

Educational and Qualifications

  • Bachelor’s Degree in Chemical or Mechanical Engineering
  • Years of Work Experience required: 10 years working experiences within the self-discipline, 10 years should be engaged on oil discipline, petrochemical, or oil and gasoline dealing with tasks
  • Age: 35-40 years.

Job Title: Major Rotating Equipment (Compressor and Turbines) Controls, Instrumentation and Automation Specialist

Location: Nigeria

Job Description / Responsibilities

  • Be accountable for Compressors and Gas Turbines controls and Instrumentation.
  • Conduct distant diagnostics and monitoring of apparatus..
  • Use software program in resolving vibration points.
  • Align and help compressor and Turbine system enchancment applications that may decrease/eradicate deferment.
  • Support and Sustain Compressor and Turbine methods. Implement and maintain Knowledge switch to respective asset workforce personnel.

Educational and Qualifications

  • Engineering Degree within the related self-discipline
  • Years of Work Experience required: 10 years cognitive expertise
  • Age: 35-40 years.

Job Title: QA / QC and Structures Integrity Specialist

Location: Nigeria

Job Description / Responsibilities

  • Ensure all QA/QC providers throughout the tasks /Asset to make sure that providers are delivered to specified requirements.
  • Hold common engagement with SPDC PQL on weekly foundation to evaluation end result of all of the QA/QC providers beneath his watch and produce minutes of assembly for signature by SPDC.
  • Plan and direct actions of Facility Statutory Inspectors and On-Plot Piping Inspection Teams, inspection assignments in SQI
  • Plan and organise extra ad-hoc inspection actions as and when required
  • Maintain a transparent and environment friendly submitting system of all QA/QC actions
  • Conduct weekly evaluation of reports in SQI; together with all findings , NCR, Observations and so forth.
  • Hold copies of present calibration certificates for all NDT gear utilized in performance of the providers.
  • Coordinate the deployment of key QA/QC providers round SPDC offshore amenities.
  • Define and develop the challenge Integrated Quality Management System, to attain flawless and defect free supply, consistent with the necessities of trade and world requirements.
  • Ensure Quality administration is targeted on risk-based pondering, setting clear necessities and offering high quality insights, primarily based on “Plan-Do-Check-Act” phases
  • Develop and implement challenge Quality Discipline Delivery Plan.
  • Develop Quality intervention applications to deal with dangers and alternatives, optimize value and add values
  • Provide enter related to high quality dangers and administration actions into PEP.

Educational and Qualifications

  • Engineering Degree and Planning Certification,
  • Years of Work Experience required: Minimum of 8 years working, precommissioning / commissioning expertise in hydrocarbon amenities
  • Age: 35-40 years.

Job Title: Commissioning and Start-Up Specialist (Instrument, Control & Automation)

Location: Nigeria

Job Description / Responsibilities

  • Review, advise and monitor the implementation of Integration & communication hyperlinks with a number of DCS & Process Automation properitarty system.
  • Integrate Safety Instrumented System with a number of properitory DCS system and platforms in accordance with requirements and statutory necessities. Review and help to develop the Commissioning check protocols protecting all Process
  • Automation system Project ITPs, protecting all key challenge actions and work areas, Monitor, evaluation and report back to PQL /PL with respect with SATs, FATsWelding Procedures, Close out of Punchlists Control Loops logic modification and testing Quality associated programmes, Alarm & Limits, Control loop performance checks , Audit Schedules and Results, and so forth.
  • Coordinate ITP Inspection , FAT and SAT at actions at numerous websites and distributors, evaluation and comment and help to implement the design management system logic.

Educational and Qualifications

  • B. Eng / B.Sc in related Engineering self-discipline
  • Years of Work Experience required: Minimum of 10 years working, precommissioning/ commissioning expertise in hydrocarbon amenities
  • Age: 35-40 years.

Job Title: Commissioning & Start-Up Specialist (Process / Mechanical)

Location: Nigeria

Job Description / Responsibilities

  • Overseeing completion of multi-discipline division of labor associated to pre-commissioning or commissioning on tasks.
  • Supporting and supervision of the commissioning workforce on tasks.
  • Provides multi-discipline enter into the scheduling, designing and planning of tasks. In addition, the Commissioning Lead additionally develops multi-discipline commissioning technique paperwork for tasks.
  • Review, approve and overseeing the set up and design of minor momentary commissioning provides and methods.
  • Review and approve all multi-discipline commissioning processes to make sure they’re compliant with the procedures, specs and requirements of the challenge.
  • Ensure that each one commissioning procedures comply with all acceptable security practices and procedures and take part in all challenge and firm security applications.
  • Audit commissioning actions repeatedly to make sure compliance with environmental, high quality, and security necessities.
  • Communicate with the challenge engineering workplace so as to be sure that the relevant fabrication drawings are created in accordance with all commissioning necessities.

Educational and Qualifications

  • Engineering Degree and Planning Certification, should be COREN licensed
  • Years of Work Experience required: Minimum of 10 years working, precommissioning / commissioning expertise
  • Age: 35 – 40 years.

Job Title: Lead, I & CA

Location: Nigeria

Job Description / Responsibilities

  • The Lead I & CA Engineer shall be chargeable for the workforce coordination / well timed provision of acceptable Instrumentation inputs consistent with the varied tasks as outlined within the scope of labor for the particular challenge
  • In addition, he shall be capable to develop new approaches to issues, put together or modify drawings, specs, calculations, and monitor work to adjust to relevant codes and requirements.
  • Be ready to make use of design instruments and software program like AutoCAD, SPI (INtools), InstruCalc to hold out design works and research and put together design reports (i.e. philosophies, specs & datasheets, examine reports, procedures), calculation sheets/notes, design drawings in addition to conduct website visits to any challenge website with out supervision or steerage.

Educational and Qualifications

  • Engineering Degree and Planning Certification, should be COREN licensed
  • Years of labor expertise required: minimal of 10 years working, precommissioning/ commissioning expertise
  • Age: 35 – 40 years.

Job Title: Principal E3D / PDMS Administrator

Location: Nigeria

Job Description / Responsibilities

  • Produce / put together 3D Implementation plans consistent with client Specification / necessities.
  • Conversant with ExxonMobil GPs Requirement relating to PMDS/E3D specs / process / necessities for a number of platforms CATS/SPECS/MACRO database arrange.
  • Project arrange, upkeep and help of the system.
  • The PDMS / E3D administrator will keep all areas of the 3D mannequin setting for stability and upkeep.
  • The Administrator shall make sure the modeling setting works appropriately in regard to the era, management and distribution of 3D mannequin interfaces.
  • Project set-up, administration and person help for Aveva PDMS / E3D / E3D.
  • Full and thru data of PDMS / E3D Ver 12.1.0.14, E3D, Paragon, PML, CATS & SPECS
  • Review total plot plan of the challenge & divide the plant to optimum variety of development areas in session.
  • Understands the scope of every challenge and has the potential to create PDMS / E3D database buildings that may allow the 3D design and subsequent creation of deliverables from the challenge databases.
  • Create PDMS / E3D mannequin primarily based on 3D modeling process with the required databases, groups and customers and entry rights
  • in line with PDMS / E3D Administration, Audit & management. (Establish procedures / specs for tasks and firm requirements relating to make use of of PDMS / E3D.)
  • Responsible for end-user coaching on the utilization of customization.
  • This contains class room / distant coaching and preparation of coaching materials.
  • Interact instantly with customers / self-discipline leads and doc necessities and particular wants associated to challenge designs and wishes.
  • Coordinate with the designers from the respective engineering disciplines to satisfy the challenge deliverables with timeliness and high quality.
  • Troubleshoot and escalate appropriately any technical points and follow-up for fast decision.
  • Project particular customization of system and writing macros as per challenge wants and for additional checking the standard of PDMS / E3D outputs.
  • Follow established PDMS/E3D requirements, Setup the PDMS/E3D and associated methods, Maintain the PDMS/E3D challenge, Provide path and help to designers
  • Provide advert hoc reports from PDMS/E3D or associated databases
  • Develops staffing schedules to make sure essentially the most advantageous utilization of accessible gear.
  • Assists in growing plans for {hardware} and/or software program purchases
  • Coordinates set up of recent methods with person schedules
  • Oversees and offers technical help for custom-made instruments, utilities and scripts to automate work processes and enhance CAD productiveness and effectivity; oversees and participates in performing day by day upkeep on CAD databases, together with researching and reconciling inconsistencies and variations in knowledge
  • Perform routine checks on mannequin by means of knowledge verification and challenge auditing.
  • Create required reports from PDMS/E3D mannequin for Layout / Material teams.
  • Extract MTO from PDMS/E3D mannequin for importing to VPRM or any materials administration system used within the challenge.
  • Upload specification recordsdata generated by VPRM in PDMS/E3D & verify the completeness and correctness of things uploaded in PDMS/E3D.
  • Setup ISODRAFT module for producing isometrics as per challenge & client specs / paperwork & resolve and hassle shoot isometric errors.
  • Update mannequin evaluation recordsdata in NAVIS WORKS format on day by day foundation and replica them to challenge server for the usage of all self-discipline engineers.
  • DESIGN-Equipment, Piping, Structural, Access ways.
  • ISODRAFT-ISODRAFT Customization as per the Requirements, Bolt desk, Backing Sheet.
  • Draft-Administration -Administration & Drafting.
  • Auto Drawing Production Methodology(ADP)
  • Paragon CATS)-Piping, Steel, Instrument, Catalogue creation & updating
  • SPECON (SPECS)-Piping, Steel, Instrument, Spec creation.& updating
  • LEXICON-UDA creation.
  • PROPCON-Properties Table Creation.
  • ADMIN- Project Set up, Access Control, Project Creation, configurations
  • MDS- Multi-Discipline Support setup and customization
  • Reports Customization as per the necessities
  • Customization and creating routine for 3D Model file export and import integration with fabrication detailing software program & Engineering evaluation software program.
  • Creation and preparation Of Macro from PML Suitable For Any PDMS/E3D Module and PML-2 Object oriented programming.
  • Transfer of specification Generated in different to PDMS/E3D & Generation of specification from piping specification.
  • Proficient in importing of backing sheet in PGA`s & Isometrics as per challenge want.
  • Report Extraction as required with challenge suit.
  • PDMS/E3D suite of software program set up and hassle capturing
  • PDMS/E3D challenge structure and Databases
  • Well versed in P&ID`S, different division drawings like gear G.A.D, Hook up and so forth.
  • Co-Ordination with different division for era of Catalogue & conflict free mannequin.
  • Familiar with pipe helps & CEASER-II software program.
  • Conversant with worldwide codes and requirements reminiscent of ANSI, ASTM, API, ASME and BS.
  • Detailed piping specification, valve specification, specialty gadgets specification, Material choice/ specialty gadgets creation from primitive on E3D.
  • Supervise and groom Designers.

Educational and Qualifications

  • Master’s Degree in Engineering or B.Sc in Engineering, COREN licensed
  • Years of Work Experience required: minimal of 8 years
  • Age: 35 – 40 years.

How to Apply
Interested and certified candidates should send their CV to: hr@kohasaeng.com utilizing the Job Title as the topic of the e-mail.

Application Deadline fifteenth February, 2021.


LIST OF JOB VACANCIES IN NIGERIA 2021

Some of the favored queries people used to seek out this Job Vacancies are kindly famous down. See the queries beneath:


Naija Recruitment News Today , Current Recruitment in Nigeria, Latest Recruitment in Nigeria, Nigerian Jobs , Todays jobs in Nigeria, Hot Nigerian Jobs, Latest Jobs in Nigeria, Nigerian Jobs Online, Vacancies in Nigeria, Nigeria Job Today, Nigeria Hot Jobs, Latest Jobs Vacancy in Nigeria, Hotnigerianjobs, Jobzilla Nigeria, Myjobmag Nigeria, Naija Hot Jobs Vacancies, Jobs in Nigeria Today.

How You Can Get Updates Regularly 
✔️ Enter Your Email To subscribe 🇳🇬

✔️ Like/Follow Our  Facebook Page 
✔️ Join our Telegram Channel 

2021 Massive Recruitment at FIRST Bank of Nigeria Limited for graduates



Recent Posts

Recent Jobs

From Ejes Gist Nigeria

The views expressed in this article are the writer’s opinion, they do not reflect the views of the Publisher of EJES GIST NIGERIA. Please report any fake news , misinformation or defamatory statements to ejesgist@gmail.com

For Publication and Advert Booking Call +2347033247217  or email ejesgist@gmail.com

 

Most Trending Post

Latest News

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.