Latest Jobs In Nigeria at SPIE Oil & Gas Services for graduates .  How to Apply for SPIE Oil & Gas Services jobs in Nigeria

SPIE Oil & Gas Services (a part of the SPIE Group) supplies a whole vary of providers to a few of the world’s largest oil and gasoline corporations by means of its community of places of work in 25 international locations throughout Africa, the Middle-East and Asia-Pacific.

Our turnover has greater than doubled in the previous couple of years because of the dedication of our 4,000 staff to whom we give coaching, recognition, and real alternatives for profession growth. In order to assist this development, SPIE Oil & Gas Services is at all times in search of gifted people to hitch its groups.

We are recruiting to fill the positions under:


Also Apply for : Graduate Trainee Job in Leading Oil and Gas Company [ Nationwide Recruitment ]

Job Title: Field Engineer
Reference: 2020-17288
Location: Nigeria
Job Type: Contract

Job Description

  • Ensure that each one actions onboard the set up vessel are complying with permitted procedures and act as supervisor onboard throughout operations


  • Ensure ample and well timed reporting to CPY rep set up vessel, anticipates issues, optimizes, improves, affords options almost about offshore operation related to the IV
  • Participate to every day coordination assembly with Contractor
  • Able to evaluate of Major occasion to warn CPY rep on board or self-discipline chief if mandatory


  • Adopt and exhibit an exemplary behaviour about Company “Code of Conduct” and HSE guidelines and rules.
  • Ensure that set up procedures are taken under consideration, the mitigation measured developed/applied by way of RISK evaluation / QRA / JSA and many others.


  • Ensure on SITE that each one actions throughout the set up vessel perimeter are complying with Installation Procedures;
  • Coordinate with different self-discipline of technical considerations
  • Ensure that each one adjustments to the permitted Installation programme and procedures are applied by CTR on Site;
  • Liaise with the self-discipline specialist to any technical concern or decision implantation
  • Ensure CPY supervision on deck and through the principle operations
  • Ensure that the Pre commissioning challenge methodology is appropriately applied on Site
  • Follow up and validate all Pre commissioning actions as per Project specs, design and codes. As such, he shall:
  • Participate to KOM with Contractor/Subcontractors wrt Pre commissioning issues
  • Interface with Contractor Pre commissioning Leader; different Package Pre commissioning / Completion entities;
  • Ensure that each one short-term installations, tools’s, fluids, spare components and consumables for Pre commissioning actions are recognized and accessible;
  • Identify/monitor vendor mobilization/demobilization schedule for Pre commissioning actions
  • Monitor that CTR follows correctly RFC validation workflow, suggest corrective actions as mandatory, and in final resort, suggest focused extra CPY supervision
  • Ensure ICAPS Punch List are up to date,
  • Ensure the monitoring of anomalies and non-conformities carried out by the Contractor and guarantee an accurate follow-up of corrective actions.

HSE Responsibilities:

  • The area engineer ensures that each one mitigation measures recognized throughout the danger assessments are applied onboard or throughout the operations.

Risk Assessment:

  • Support the RSES D to evaluate any technological danger evaluation, particularly in relation to main dangers.

Risk Management:

  • Observance of the work and well being / hygiene circumstances mandatory to be able to defend people;
  • Regular take part to Safety stroll onboard
  • Compliance with the affiliate-defined security measures
  • Preservation or enchancment of the extent of cleanliness, security and integrity on the installations;
  • Ensure applicability throughout operation of downgraded conditions (detection, evaluation, compensatory measures…) with a view to restoring regular.


  • Qualification: Chartered Engineer with related expertise of offshore manufacturing services and initiatives.
  • Professional Experience (variety of years): 10
  • Experience inside challenge : (variety of years): 5
  • Knowledge and understanding of subsea engineering / set up related to Oil & Gas building and area growth.
  • Strong communication and process / report writing abilities. Works properly with others in an offshore setting. Ability to know and interpret instruction and coordinate personal work.

Candidate Criteria:

  • Minimum stage of expertise required: 10 years or extra
  • Languages: English (D-Full skilled proficiency).

Interested and certified candidates should:
Click here to apply


ALSO APPLY : 2020 Massive Recruitment for Academic Staff at Achievers University [ Hot Jobs in Nigeria ]


Job Title: PLC Supervisor (M / F)
Reference: 2020-17358
Location: Offshore, Nigeria
Job Type: Contract


  • We are at present on the lookout for a PLC Superviosr to work in on one among our key initiatives (FPSO)

Job Dimensions

  • Direct accountability for the upkeep, operation and configuration of the {hardware} and software program of the Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI) and related units of all Packages throughout the AKPO Industrial Information System (SII),
  • Partial accountability for the AKPO Safety Instrumented System,
  • Reports to the ICSS Administrator,
  • Is assisted by the Triconex Specialist.
  • The FPSO produces 160 kbopd of Oil and 600 mmscfd of Gas and has a storage capability of two,000,000 barrels.

Job Contents / Problem Solving (Activities):

  • HSE Ensure that COMPANY’s HSE rules are revered


  • Maintain, function, modify and carry out routine duties on the PLCs, HMIs, automation computer systems and Unit Control Panels (UCP) of all AKPO Packages situated within the Hull and Topside of the FPSO in addition to the Buoy, all situated throughout the AKPO Field.
  • Carry out modifications on each {hardware} (enter, output, communication playing cards and many others) and software program (management and security logic, sequence logic and many others) of all methods (compressors, pumps, oil & gasoline metering system, High Integrity Pressure Protection System (HIPPS), Tank Gauging System (TGS), Power Distribution Control System (PDCS), Telemetry System, machine monitoring system and many others), below his accountability as could also be required, requested or directed by COMPANY.
  • Prepare with the ICSS Administrator, preventive and corrective actions and modifications of the methods below his accountability.
  • Manage and doc in technical reports, interventions utilizing the CMIMS and work packs supplied by the planning crew.
  • Follow up the parameter values and alarms within the involved methods below his accountability and carry out hassle capturing if required.
  • Control and apply inhibits within the methods as directed and managed by COMPANY guidelines and procedures.
  • Maintain an correct and auditable log of all system defects and inhibits (Short time period and long run).
  • Take half in every day, weekly and coordination conferences on SITE,
  • Identify, within the preparatory stage of upkeep works, any delicate operation and be certain that a correct evaluation of the dangers concerned is carried out beforehand,
  • Identify recurrent corrective upkeep interventions, analyse them and recommend enhancements, in addition to issues associated to availability, high quality and obsolescence of spare components.
  • Track any backlog of labor in space of accountability and recommend corrective measures to COMPANY and CONTRACTOR to enhance the administration of the backlog.
  • Review and guarantee that each one Software Modifications and corrective actions are validated by COMPANY.

The holder of this submit should have the next {qualifications}:

  • National Diploma or Certificate (ND / NC) or A-levels + 3 years’ additional examine or BTS/DUT or equal,
  • 6 years’ expertise within the area of Control and Safety Systems and a minimal of three years as a Specialist in Control and Safety methods within the Oil and Gas / Petrochemical business,
  • Knowledge of the oil and gasoline therapy course of, installations and tools. Advanced data and ability in PLC’s particularly Siemens’ SIMATIC Industrial Automation Systems, Panels and HMI’s.
  • Knowledge of machine management (e.g compressor management, injection pump management, offloading pump management, turbine management) might be an added benefit.
  • Knowledge of basic instrumentation ideas, area units (sensors and closing parts), instrument loops, and many others.
  • Awareness of Emerson’s DeltaV Process Control System, Allen Bradley’s ControlLogix System and Schneider’s Triconex Safety Instrumented Systems are an added benefit.
  • Awareness of SAP CMIMS or related
  • Awareness of Operator Training Simulators.
  • Possession of fine interpersonal abilities Fluency in English language is required and data of French language is a bonus
  • Manages interventions utilizing the CMIMS and work packs supplied by the planning crew,
  • Reviews all intervention reports within the CMIMS (together with these regarding SMC) and writes the detailed technical
  • reports associated to his area,
  • Monitors (and in sure plant – Operates) the functioning of any tools positioned below his accountability,
  • Performs hassle capturing within the ICSS, PLC, and many others.
  • Follows up the Parameter values and alarms within the involved methods for situation monitoring functions,
  • Controls and applies inhibits within the methods as directed and managed by COMPANY guidelines and procedures.
  • Maintains an correct and auditable log of all system defects and inhibits (Short time period and long run)
  • Takes half in every day, weekly and coordination conferences on SITE,
  • Ensures that the switch of data by mentoring happens correctly inside his groups and actively participates on this
  • himself, main others by his instance,
  • Manages and Coaches/Mentors the ICSS/PLC technician immediately below his accountability,
  • Carries out, at COMPANY Validation, any intervention inside his area of competence.
  • Takes in cost the methods below his accountability in case of breakdown till appropriate operation is resumed.

Candidate Criteria

  • Minimum stage of expertise required: 6 years or extra
  • Languages: English (D-Full skilled proficiency).

Interested and certified candidates should:
Click here to apply




Job Title: CBM Engineer (M / F)
Reference: 2020-16974
Location: Port Harcourt, River (Occasional web site visits to websites)
Job sort: Fixed-term-contract
Contractual hours: On demand
Contract length: TBC

Job Description

  • SPIE NIGERIA Limited is actively on the lookout for CBM Engineers profiles to hitch its workforce in Nigeria

Your actions will embody:

  • Contributes to the constructing of Methods and Support actions throughout the Maintenance entity.
  • Carries out CBM vibration surveys on web site as per planning developed by the CBM Lead and points reports accordingly
  • Follows up with web site to make sure that all actions arising from the CBM Surveys are promptly closed
  • Carries out Lube Oil sampling as per the planning, performs laboratory evaluation of the samples as required and points reports accordingly.
  • Advises web site on the end result of the Lube Oil evaluation and the actions required to be carried out to make sure tools availability.
  • Reviews and advises and follows up on the appropriate course of for Lube Oil administration on web site.
  • Carries out gasoline leak investigation / surveys on websites and makes estimates of the leakage charges of valves. Also, develops the motion plan to shut out the leaks on the involved valves.
  • Participates in RAID conferences with HQ and Smart Room and follows up with TADM’s and web site to make sure the closure of the actions arising therefrom.
  • Assists in vibration analyses and different analyses together with all strategies associated activites as required by the CBM Lead.
  • Is in fixed liaison with the Smart Room Engineers, Maintenance disciplines TADM’s and Methods Engineers to follow-up actions almost about the outcomes of the totally different CBM measurement campaigns.
  • Follows up with web site on all of the corrective actions really helpful following analyses to make sure that they’re correctly applied.
  • Visits web site each time the necessity arises and bodily assists to hold out specialised actions following from CBM outcomes (balancing, alignment, rotor axial place adjustment, proximiter gaps setting, and many others.…)

Within the framework of JV Assets FOPS, within the area of Maintenance, the principle goals for job holder are to:

  • Perform correct works coordination, actions reporting, tools situation evaluation, in view of sustaining and optimizing the operations and the tools performance.
  • Participate within the preparation and reporting for Maintenance entity actions together with issuance of dashboards and reports
  • Control and administer the technical and administrative documentation throughout the Maintenance entity together with engineering and vendor technical documentation and guarantee replace of CMIMS, EDMS, and servers.
  • Responsible to make sure that the tools registers are saved up-to-date and that upkeep information are validated at correct stage, correctly reported, recorded and maintained within the devoted knowledge bases.
  • Ensure that tools availability and reliability are at their optimum.

Qualification / Experience Required:

  • Education: BSc / BEng in Engineering Vibration ISO Cat II Certification, primarily based on the ISO 18436-3
  • Professional expertise: 10 years in Oil & Gas environemt
  • 5 years expertise in Condition Based and Predictive Maintenance
  • Experience in upkeep assist and particularly in area upkeep capability
  • Good data or CBM instruments (OROS, Bentley Nevada, OneProd, Allen Bradley, and many others…)
  • Good data of planning instruments, and of CMIMS instruments (ideally SAP primarily based)

Candidate Criteria
Minimum stage of expertise required

  • 6 years or extra


  • English (E-Native or bilingual proficiency)

Interested and certified candidates should:
Click here to apply




Job Title: PLC / ICSS Engineer (M / F)
Reference quantity: 2020-17197
Location: Nigeria
Contract: Permanent contract
Contractual hours: On-demand
Employee Status: Employee

Job Description
Software Maintenance:

Provide availability for installations, Analyse and diagnose potential communication issues, Execute the management modifications and/or corrective actions for :

  • Alarm labels, flawed animations and many others.
  • Logic change on particular working factors.
  • Data upkeep and updating accessible for P.I.
  • Scale and threshold test, potential corrective actions.
  • Transfer these modifications on offshore websites and replace them.
  • Analyse and diagnose potential automation working issues.
  • Execute program modifications required by TEPNG.
  • Realize controller and automaton applications backups.
  • Keep updated DCS paperwork and diagram.

Material Maintenance:

  • Diagnose malfunctions and execute materials upkeep.
  • Execute preventive upkeep works :
  • PC disk and reminiscence free house test.
  • Package and system fault logs test.
  • PC mouse and keyboard test.
  • Ventilation filters and PC/Server de-dusting.
  • PLCs batteries follow-up, potential adjustments.


  • Take instruction from the upkeep superintendent of TEPNG
  • Use the CMMS (SAP) software program as his primary organisation device.
  • Manage system comply with up
  • Update the « Assistance sheets requests »..
  • Print exercise report.
  • Involvement in building works in accordance with upkeep superintendent
  • Provide help to the operators:
    • Give exact particulars about pump start-up or valve port circumstances
    • Help for prognosis,
    • Explain DCS functionalities (check report printing, threshold modification, alarm inhibit, and many others.).
  • Collect operators « suggestions » for potential system enhancements.
  • Assist primarily instrument supervisor of their totally different upkeep duties related with the DCS (scale test, measures and many others.)

Materials used on Site:

  • SIEMENS Simatic S5
  • Triconex
  • Les serveurs: CISCO 4000
  • Bently Nevada


  • Able to specific himself in English really helpful French.
  • Reliability, with a big expertise to function oil or gasoline area.
  • Ability to work below strain and stressing circumstances.
  • Position holder is situated on COBO with 24-hrs obligation on a 4 x 4 weeks rotation schedule.
  • Needs to keep up good communication with different TEPNG departments, prod & methodology,
  • Ensures secure, environment friendly and cost-effective operations by means of proactive administration Mtce Contractor.
  • Achievement of required upkeep applications.

Interested and certified candidates should:


Latest <a class="wpil_keyword_link" href="" target="_blank" rel="noopener noreferrer" title="Jobs In Nigeria" data-wpil-keyword-link="linked">Jobs In Nigeria</a> at SPIE Oil & Gas Services

Latest Jobs In Nigeria at SPIE Oil & Gas Services

SPIE Oil & Gas Services
Same as (Website / Social Media)
Job Location
Postal Code
Country ISO Code
Region ISO Code
Currency ISO Code
Job Meta
Employment Type
Full Time
Valid Through
30th November , 2020.

People additionally seek for

SPIE Oil and Gas Recruitment Portal 

Click on the Apply button and it’ll take you to SPIE Oil & Gas Services Recruitment Portal

SPIE Oil and Gas Services Nigeria

Above is the present job vacancies in SPIE Oil & Gas Services

SPIE Oil and Gas Recruitment 2020

Ejes Gist Published present jobs Vacancies from SPIE Oil & Gas Services

SPIE Oil and Gas Port Harcourt

Get the newest Job Vacancies from SPIE Oil & Gas Services primarily based in Port Harcourt, Nigeria.


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.