Job Recruitment in a Multinational Oil and Gas Company

0
Top Ads

Maventeq Systems Limited – Our client, a multinational Oil and Gas firm in Nigeria is presently recruiting suitably certified candidates to fill the place under:

Job Title: Senior Instrumentation Engineer

Location: Port Harcourt, Rivers

Job Responsibilities

  • Review and replace the technical descriptions for all instrumentation supplies put in and in operational spares inventory at COMPANY amenities
  • Embark upon Site Visit to warehouses in order to hold out a detailed inspection (QA/QC) of instrumentation inventory supplies in order to determine their situations.
  • Update and populate all mandatory templates required to load the up to date technical description
    knowledge into the COMPANY’s CMIMS (SAP database)
  • Formulate a plan, assessment and analyze preventive upkeep technique for the gear instrumentation in order to attain highest effectivity of the actions for dependable and protected operation.
  • Identify all necessities for materials/gear certification (ATEX, gear, Mill check, Calibration, stress check certificates, lifting certificates and so forth.) for all put in instrumentation supplies/gear and operational spare elements.
  • Review materials stock in SAP and Identify and take away out of date supplies from FLOCs and substitute them with present supplies.
  • Review on website and determine supplies that aren’t discovered in SAP (lacking BOM) and create them in line with COMPANY’s process for including supplies to SAP.
  • Provide technical recommendation throughout troubleshooting and corrective motion of instrument breakdown or failures to search out the basis trigger and best resolution in order to revive the performance again to regular.
  • Attend to technical question by operation personnel and present recommendation/resolution in line with best engineering follow to handle points which have an effect on the operation.
  • Monitor spare elements and stock for important instrumentation to make sure availability when required in order to attenuate manufacturing interruption. Establish new stock/cataloging the place mandatory. Update info in the stock to make sure it’s related for the present operation.
  • QA/QC inspection of incoming/delivered supplies and outgoing supplies and instruments to be loaded to offshore websites
  • Provide technical inputs in full cycle of procurement processes for contract, supplies and service requisition the place required so that each one technical necessities are addressed correctly to guard firm curiosity.
  • Identify, research, suggest, and implement space for enchancment (challenge) in the sector of instrumentation engineering to boost operation and enhance complete gear reliability.
  • Develop the plan, scope and lead the execution of shutdown works for instrumentation to make sure completion throughout the specified window.
  • Supervise work execution on website, develop procedures and instruction for both upkeep, shutdown or challenge to make sure compliance to security, specification, customary and procedures in order to attain highest high quality of the work
  • Ensure compliance with inner and exterior HSE Regulations and Specifications

Job Requirements
Key Skills and Abilities:

  • A Bachelor’s Degree (BSc) in Electrical/Electronic Engineering, Electrical Engineering or Computer Engineering or associated
  • 7+ years expertise in Instrumentation engineering design (onshore & offshore) throughout the Oil and Gas EPC (or associated) surroundings.
  • Strong interpersonal abilities, a crew participant and capable of work with all ranges of administration and multinational workers.
  • Ability to prioritize and manage work as effectively.
  • Proficient in the usage of CMIMS (SAP/UNISUP).
  • Preferably a NSE/COREN Registered Engineer
  • Basic Offshore Safety Induction & Emergency Training (BOSIET) together with (CA-EBS) coaching
  • Must be aware of related codes, requirements, oil and gasoline trade design specs and practices e.g. API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, and so forth.

Job Title: Project Supervisor

Location: Port Harcourt, Rivers

Job Responsibilities

  • Management, co-ordination and supervision of the PROJECT work to make sure that the WORK is carried out to the required schedule, high quality and security necessities.
  • Prior to graduation of challenge, shall present a Method statement or guideline doc with
    particulars of challenge execution plan (together with MRP modification tips) for COMPANY approval.
  • To coordinate every stage of the challenge in collaboration with the related parties and guarantee respect of the challenge necessities, price range and milestone. This shall embrace to watch and management intently CONTRACTOR actions and suggest the mitigation actions for any nonconformity or slippage (technical, price range, schedule).
  • Provision of a detailed work tips/process and Job Safety Analysis and accredited by COMPANY earlier than graduation of challenge
  • Management of Contrator’s groups performing duties on COMPANY places.
  • To suggest the organization for the execution of the challenge and handle the organization of the assigned challenge/s.
  • To guarantee the provision of the accredited contractual documentation, accredited price range and make sure the implementation as per requirement.
  • To handle the preparation of any website work and handle the execution.
  • Ensure the respect of approval necessities for every stage of the challenge.
  • To promote innovation and the fee discount options for all line of actions.
  • To put together and expedite the required report(s) of the challenge together with for the aim of the interfaces. This shall embrace provision of all related info required for challenge reporting.
  • To be chargeable for the issuance of challenge shut out report and return of expertise for challenge archive.
  • Ensure compliance with inner and exterior HSE Regulations and Specifications
  • To perform every other duties/initiatives could also be assigned to him/her by the hierarchy.

Job Requirements

  • Engineering background with a minimal of 10 years expertise in development of O&G installations and challenge administration.
  • Fluent in English.
  • Proficient in the usage of CMIMS (SAP/UNISUP).
  • Working Knowledge of: WORD, EXCEL, MS PROJECT.
  • Good interpersonal and communication abilities.

Job Title: Senior Electrical Engineer

Location: Port Harcourt, Rivers

Job Responsibilities

  • Retrieve, assessment and replace the technical descriptions for all electrical supplies/gear put in and in operational spares inventory at COMPANY amenities
  • Embark upon Site Visit to warehouses in order to hold out a detailed inspection (QA/QC) {of electrical} inventory supplies in order to determine their situations.
  • Update and populate all mandatory templates required to load the up to date technical description
    knowledge into the COMPANY’s CMIMS (SAP database)
  • Identify all necessities for materials/gear certification (ATEX, gear, Mill check, Calibration, stress check certificates, lifting certificates and so forth.) for all put in electrical supplies/gear and operational spare elements.
  • Review materials stock in SAP and Identify and take away out of date supplies from FLOCs and substitute them with present supplies.
  • Review on website and determine supplies that aren’t discovered in SAP (lacking BOM) and create them in line with COMPANY’s process for including supplies to SAP.
  • Equipment Selection, Sizing, Evaluation, and Integration of newly put in ones to present amenities,
  • QA/QC inspection of incoming/delivered supplies and outgoing supplies and instruments to be loaded to offshore websites
  • Generate Equipment Specification, Data Sheets for Electrical Equipment resembling Transformers, Electric Motors, and Switchgears.
  • Perform Cable Sizing and Voltage Drop Calculations for newly launched gear
  • Involved in COMPANY’s Drawings Review for Evaluation, Correction and Follow up.
  • Determine Fault Level Current and Short Circuit Analysis for Switchgears, Transformers Electric Motors.
  • Perform Assessment, Hazard Area Classification (HAC) of newly put in gear and combine them to present HAC drawings.
  • Ensure compliance with inner and exterior HSE Regulations and Specifications

Job Requirements

Ads 17
  • B.Eng. in Electrical/Electronics Engineering or associated
  • Preferably a NSE/COREN Registered Engineer
  • Minimum of 10 years in comparable function
  • 7+ years expertise in Electrical engineering design (onshore & offshore) throughout the Oil and Gas EPC (or associated) surroundings.
  • Must be aware of related codes, requirements, oil and gasoline trade design specs and practices e.g. API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, and so forth.
  • Must have a thorough working data of the newest design engineering, analytical methods and software program applications
  • Proficient in the usage of CMIMS (SAP/UNISUP).
  • Good communication and presentation abilities
  • Ability to guide and Motivate a crew
  • Capable with the next software program: WORD, ETAP, EXCEL, SKM, DIAL LUX, MS PROJECT
  • Basic Offshore Safety Induction & Emergency Training (BOSIET) together with (CA-EBS) coaching.

Job Title: Senior Mechanical Engineer

Location: Port Harcourt, Rivers

Job Responsibilities:

  • Review and replace the technical descriptions for all mechanical supplies put in and in operational spares inventory at COMPANY amenities.
  • Embark upon Site Visit to warehouses in order to hold out a detailed inspection (QA/QC) of mechanical inventory supplies in order to determine their situations.
  • Update and populate all mandatory templates required to load the up to date technical description knowledge into the COMPANY’s CMIMS (SAP database).
  • Develop main gear and materials choice, and development specs.
  • Ensure that each one assigned actions and operations adjust to relevant codes, laws and legal guidelines.
  • Identify all necessities for materials/gear certification (ATEX, gear, Mill check, Calibration, stress check certificates, lifting certificates and so forth.) for all put in mechanical supplies/gear and operational spare elements.
  • Review materials stock in SAP and Identify and take away out of date supplies from FLOCs and substitute them with present supplies.
  • Review on website and determine supplies that aren’t discovered in SAP (lacking BOM) and create them in line with firm’s process for including supplies to SAP.
  • QA/QC inspection of incoming/delivered supplies and outgoing supplies and instruments to be loaded to offshore websites
  • Provides technical course, assist and info to different engineers, designers and drafters.
  • Preparation and checking of all challenge deliverables together with Specifications, Data Sheets, MR and TBE.
  • Vendor Document Review of Pressure vessel, Shell & tube warmth exchanger, Reactor, Process Column, Storage Tank, Air Cooled exchanger, different static gear.
  • Performs interdisciplinary checks in addition to corresponding with distributors.
  • Prepare gear, materials and man -hour estimates.
  • Review contract necessities for challenge execution, determine technical necessities, scope of labor; assessment Project specs, Process Data Sheets (PDS), Piping Instrumentation Diagrams (P & IDs), Plot plans, gear Layout Drawings, and different related paperwork.
  • Review Project Design Basis, Prepare gear Design Basis, Mechanical knowledge sheets.
  • Ensure compliance with inner and exterior HSE Regulations and Specifications.

Job Requirements:
Educational qualification required:

  • A Bachelor’s Degree (BSc) in Mechanical Engineering.
  • Preferably a NSE/COREN Registered Engineer.
  • 7+ years expertise in Mechanical engineering design (onshore & offshore) throughout the Oil and Gas Design Engineering (or associated) surroundings.
  • Knowledge and expertise in working with API and ASME codes and requirements.
  • Desirable to have familiarity with specs and requirements of worldwide Clients like Shell DEP,Total GS, and so forth
  • Shall be conversant with PV-Elite / Autopipe Vessel / Compress.
  • Proficient in the usage of AutoCAD & CMIMS (SAP/UNISUP).
  • Basic Offshore Safety Induction & Emergency Training (BOSIET) together with (CA-EBS) coaching.

How to Apply
Interested and certified candidates should send their CV to: careers@maventeqsystems.com utilizing the Job Title as the topic mail.

Application Deadline twenty third April, 2021.

Note: Only candidates who meets the job necessities can be contacted.


ALSO CHECK : List of Current Job Vacancies in Nigeria for March /April 2021


HOT JOB VACANCIES IN NIGERIA

Some of the Top Questions people used to search out this Job Vacancies are kindly said down. See the queries under:


Latest Jobs Vacancies in Nigeria Today, CURRENT NGO JOBS IN NIGERIA for GraduatesNgo Jobs Hiring Now , NGOs that Pay Well in Nigeria, Hotnigerianjobs, Jobzilla Nigeria, Myjobmag Nigeria, Naija Hot Jobs Vacancies, Jobs in Nigeria , Hot Nigerian Jobs – in Nigeria.

Ads by Google b

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.